RabbitLink EG2110 Instrukcja Użytkownika Pobierz pdf (Strona 11)

www

zworld

com

RabbitNet Expansion System

NEMA 4 Compliant Serial Only/Non-Ethernet Ethernet & Serial Communication

RoHS

RoHS Compliant

Low-Power

RabbitNet Expansion System

RN1400 Relay Expansion

Relay Outputs

• (6) SPDT: 10 ms max. contact

settling time; 250 V AC, 125 V DC

max. switching voltage; 10A AC,

8A DC max. switching current;

1200 W AC, 240 W DC max. switching

capacity; built-in 47 W , 100 nF

Snubbers; #14 AWG (1.628 mm dia) max. terminal wire

• ST72F264G Microprocessor

The RabbitNet RN1400 relay card is a peripheral I/O card designed for

use with Z•World controller products with RabbitNet expansion ports,

such as the BL2500 Coyote and OP7200 eDisplay. The relay card is DIN

rail mountable.

Hardware Features: 6 SPDT relays,10 A maximum switching current

(5 A DC), 100 mm DIN rail tray mountable, and RabbitNet interface with 1

Megabit per second using standard Ethernet cable, and up to 10 m (33 ft)

away from master (RS-422). 101-0617

RN1300 D/A Expansion

Analog Ouputs

• 8 channels of 12-bit

analog outputs, 8 ohm

output impedance,

2.5 kHz update rate

• Software-controlled output-voltage

ranges: 0–2.5 V, 0–5 V, 0–10 V, 0–20 V DC

(channels AOUT0-AOUT1) 0–10 V, 0–20 V DC

(channels AOUT2-AOUT7)

The RabbitNet RN1300 D/A card is a peripheral I/O card designed for use

with Z•World controller products with RabbitNet expansion ports, such

the BL2500 Coyote and OP7200 eDisplay. The cards are DIN rail mountable

and have friction-lock connectors for simplified OEM manufacturability.

Hardware Features: 8 channels of 12-bit analog outputs, software-con-

trolled voltage ranges, 100 mm DIN rail tray mountable, RabbitNet

interface: 1 Megabit per second using standard Ethernet cable, up to

10 m (33 ft) away from master (RS-422). 101-0688

RN1200 A/D Expansion

Analog Inputs

• 8 single-ended 11-bit or

4 differential 12-bit

analog inputs 1 M input

impedance, 2.5 k samples/sec. ,

all 8 channels can be configured

as 11-bit 4–20 mA analog inputs

• Software-controlled ranges: 0–1 V, 2 V, 5 V, 10 V, 20 V DC

(single ended) or ±1 V, ±2 V, ±5 V, ±10 V, ±20 V DC (differential)

The RabbitNet RN1200 A/D card is a peripheral I/O card designed

for use with Z•World controller products with RabbitNet expansion

ports, such as the BL2500 Coyote and OP7200 eDisplay. The cards are

DIN rail mountable and have friction-lock connectors for simplified

OEM manufacturability.

Hardware Features: 8 single-ended 11-bit or 4 differential 12-bit

analog inputs, software-controlled voltage ranges, 100 mm DIN rail tray

mountable, RabbitNet interface: 1 Megabit per second using standard

Ethernet cable, up to 10m (33ft) away from master (RS-422). 101-0616

RN1100 Digital I/O Expansion

• Digital Inputs: 24, protected to ±40 VDC,

switching threshold is 1.5 V nominal

• Digital Outputs:16, push-pull up to

200 mA each, 40 VDC max.

• Analog Inputs: 4 buffered channels: 10-bit

resolution, 8-bit accuracy, 1.5K samples/sec.,

one channel Input ranges: 2 channels 0–10 V, single

ended, 1 channel 0–1 V, single-ended, 1 channel

-0.25–0.25 V differential Input resistance > 100K

The RabbitNet RN1100 Digital I/O card is a peripheral

I/O card designed for

use with Z•World controller products with RabbitNet expansion ports, such

as the BL2500 Coyote and OP7200 eDisplay. The cards are DIN rail mount-

able and have friction-lock connectors for simplified OEM manufacturability.

Hardware Features: 24 protected and filtered digital inputs,16 high-

speed protected sinking/sourcing digital outputs, four 10-bit analog

input channels, 100 mm DIN rail tray mountable, RabbitNet interface: 1

Megabit per second using standard Ethernet cable, up to 10 m (33 ft)

away from master (RS-422). 101-0612

RabbitNet expansion ports enable a modular and expandable embedded control system whose

configuration of expansion cards can be tailored to a large variety of demanding real-time control,

display, and data-acquisition applications. A typical RabbitNet system consists of a master single-

board computer and one or more peripheral cards. A high-performance Rabbit 3000® or Rabbit

2000 microprocessor on the master provides fast data processing, and the BL2500 and BL2600

masters also provide the DCIN and +5 V power for the peripheral cards. Based on a robust RS422

interface, utilizing off-the-shelf Ethernet cables any RabbitNet product can be used to expand

existing system functionality or increase the distance from the master device to the peripheral.

Features

• Low-cost expansion solution

• Easy to implement

• Uses all standard length

CAT5 Ethernet cables

• Supports several master

control devices

Programming RabbitNet Cards

Programs are developed and debugged using Z•World’s industry-proven Dynamic C® software,

which runs on a Windows PC. The Keypad/Display Interface expansion card is a slave; the master

to which RabbitNet peripheral cards are connected is programmed using version 8.01 or later of

Z•World’s Dynamic C. Dynamic C includes comprehensive debugging support and includes break

points, watch expressions, and many other extensive features oriented toward real-time embedded

systems programming. An extensive library of drivers and sample programs is provided, including

a royalty-free TCP/IP stack for network and Internet communications. Full source code is provided

for most library routines. Dynamic C is sold separately.

RabbitNet Expansion System

• (1) Keypad/Keyboard Interface: 1–64 keys, 0.1” spacing on flex cable

and Berg series 65801 connector

• (1) Liquid Crystal Display Interface: 1 x 8–4 x 20 character display module

compatible, 2 x 8 header and 1 x 16 socket (both standard), LED backlight

support (software on/off control) and contrast adjustment (not software controlled)

The RabbitNet™ RN1600 Keypad/Display Interface card is a peripheral I/O card designed for use with Z•World

single-board computers such as the BL2500 Coyote, BL2600 Wolf, and OP7200 eDisplay that have RabbitNet expansion

ports. The RN1600 provides a simple, inexpensive interface for connecting a wide variety of displays (up to 4 x 20) and

keypads (up to 64 keys). For convenience, the RN1600 is DIN rail mountable. 101-0879

RN1600 Keypad/Display Interface

RN1600 Expansion Kit

Rabbit Net Shared Features

Features RN1600 RN1400 RN1300 RN1200 RN1100

Serial Port RabbitNet™ RS-422, 1 Mbps

Power 5.0 V DC +/- 5%, <60 mA

(excluding backlight)

+5 V, 500 mA,

250 mA power save mode.

(all relays engaged)

Vcc: +5 V DC, 20 mA DCIN: >13

V for 10 V output, >23 V for

20 V output, 100 mA

Vcc:

+5 V DC,

100 mA

Vcc: +5 V DC, 20 mA DCIN: 9–32 V DC

(12 V min. if using analog inputs), 500 mW +K1,

+K2: 5-36 V DC, 1.6 A each

Operating Temp. –40°C to +85°C (excludes customer supplied LED display) -40°C to +70°C -40°C to +85°C -40°C to +70°C

Humidity 5–95% (noncondensing)

Connectors (1) RabbitNet RJ-45,

(1) 0.156” 4-position vertical power header, (1)

1x16, 0.1” position vertical header for keypad

interface, (1) 2 x 8, 0.1” vertical header for

LCDM interface, (1) 1 x 16, 0.1” vertical socket

for LDCM interface (optional)

(6) screw terminal headers, Friction-lock:

(1) polarized 9-position terminals with 0.1” pitch

Friction-lock:

(6) polarized 9-position terminals w/

0.1” pitch,

(2) 2-position power

terminals w/

0.156” pitch,

(1) 4-position friction-lock connector with 0.156” pitch, (1) RJ-45 RabbitNet™ jack

Board Size 2.95” × 3.94” × 0.77”

(75 × 100 × 20 mm) (DIN rail mountable)

3.94 “ × 5.87” × 0.75”

(100 x 150 × 19 mm)

1.97” × 3.94 “ × 0.67”

(50 × 100 × 17 mm)

3.55” × 3.95 “ × 0.67”

(90 × 100 × 17 mm)

Part Number 101-0879 101-0617 101-0688 101-0616 101-0612

Key Applications

• Building / Home Automation

• Handheld Devices

• Industrial Automation

• Point-of-Sale / Barcode Scanners

• Telecom Systems

• Wireless Devices

• Security Access / Biometric Systems

• GPS Systems

• Food Service Equipment

• Medical Devices

• Packaging Equipment

• Utility Metering Devices

• Ethernet / Internet Interfacing

• Point-of-Sale / Barcode Scanners

• Robotics Control

• Military / Transportation Systems

• Semiconductor Manufacturing

Equipment

• Service Processor / Device Monitors

• Marine Systems

• Test Equipment

• Remote Monitoring Systems

Internet/

Ethernet

Keypad/Display

Interface*

RN1600

Relay Card

RN1400

Master

Controller

BL2500

Any two can be

used with the BL2500.

A/D Card

RN1200

Digital I/0

RN1100

D/A Card

RN1300

* Does not support two RN1600 cards on one BL2500

Includes an RN1600, 0.156”

pitch crimps, connector set

(headers and sockets), cable set,

display set (one 4 x 20 LCD, one 2

x 20 LCD), keypad set (1 each: 10

x 4, 3 x 4, 2 x 6, membrane keypads).

101-0887

Order Online

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Komentarze do niniejszej Instrukcji

Brak uwag

RabbitLink EG2110 Instrukcja Użytkownika Strona 11

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking RabbitLink EG2110